Xantrex DR 1524, Инструкция по установке и эксплуатации, Страница: 8 / 84

©2000 Xantrex Technology Inc. VI
BATTERY SAFETY INFORMATION
· Always wear eye protection, such as safety glasses, when working with batteries.
· Remove all loose jewelry before working with batteries.
· Never work alone. Have someone assist you with the installation or be close enough to come to
your aid when working with batteries.
· Always use proper lifting techniques when handling batteries.
· Always use identical types of batteries.
· Never install old or untested batteries. Check each battery’s date code or label to ensure age
and type.
· Batteries are temperature sensitive. For optimum performance, they should be installed in a
stable temperature environment.
· Batteries should be installed in a well vented area to prevent the possible buildup of explosive
gasses. If the batteries are installed inside an enclosure, vent its highest point to the outdoors.
· When installing batteries, allow at least 1 inch of air space between batteries to promote cooling
and ventilation.
· NEVER smoke in the vicinity of a battery or generator.
· Always connect the batteries first, then connect the cables to the inverter or controller. This will
greatly reduce the chance of spark in the vicinity of the batteries.
· Use insulated tools when working with batteries.
· When connecting batteries, always verify proper voltage and polarity.
· Do not short-circuit battery cables. Fire or explosion can occur.
· In the event of exposure to battery electrolyte, wash the area with soap and water. If acid enters
the eyes, flood them with running cold water for at least 15 minutes and get immediate medical
attention.
· Always recycle old batteries. Contact your local recycling center for proper disposal information.