Xante Assel-a-Writer-8300, Инструкция по эксплуатации

Страница: 283 / 338

______________________ Application Notes and Page Design B-11
6. Make sure the Installed Memory, Spooler Enabled, Optional
Duplexer, Optional Wide Format, Optional Lower Tray, and
TraySwitch settings match your setup. (See the next section,
“Using PageMaker 6.0 and 6.5,” for details.) Then, click
Document to return to the Print dialog box.
7. Make any other desired selections in the Print dialog box.
8. Click Print to send the job to the printer.
Using PageMaker 6.0 and 6.5
From the print dialog box, select the Features menu. Printer options
that are set through the Options menu in most applications are set
through the Features menu in PageMaker 6.0 and 6.5. See chapter 6,
“PPD Settings,” for a description of the printer features available
through this menu.
In addition to the standard printer options described in chapter 6,
PageMaker requires that the following options be set in the Features
menu of the print dialog box.
• Installed Memory must be set to agree with your printer and
Chooser configuration. Your printer’s installed resolution
upgrade will not appear in the Resolution menu of the
Pagemaker Features dialog box unless the Installed Memory
option is properly configured.
• Spooler Enabled must be set to True to enable the Save
Spooled Job menu in the Features section of the PageMaker
Print dialog box. The spooler must also be enabled for the
interface you are using (through the front panel or XANTÉ
Command Center) and configured in the Chooser or Windows
configuration.
• Optional Duplexer must be set to agree with your printer and
Chooser or Windows configuration.
• Optional Wide Format must be set to agree with your printer
and Chooser or Windows configuration.