background image

___________________________________________

 PC Setup  4-15

9.

Click Close in the Printers dialog box; then close the Control
Panel window. After installing and configuring the AdobePS
printer driver and PPD, see “Configuring the Printer” later in
this chapter to verify that the printer interfaces are properly
configured.

Deleting Previous Driver Versions

Normally, you do not have to delete previous versions of the Adobe
PostScript printer driver for Windows or any previously installed
Adobe PostScript printers. However, if you suspect installation
problems, first remove your installed printers from the Printers
dialog box in the Windows Control Panel and reinstall them via the
Adobe PostScript Printers dialog box which is also in the Windows
Control panel.

If after removing and reinstalling your printers, you still experience
problems, delete all previous driver versions and reinstall your
printers using the Adobe PostScript Printers dialog box.

To delete a previous version of the driver

1.

Exit Windows and go to DOS.

2.

Delete the following files from both your Windows and
Windows: System directories.

Note:

Your configuration may not include all these files, but
you need to delete the ones that are there.

*.EBF
*.PPB
*.PPD
*.PFM (delete the *.PFM files only if you did not place them

here using the ATM control panel or a font
installation program)

ADOBEPS?.*
RUN_ENUM.*
PSINSTDV.EXE
WINDOWN.EXE
PS_ENUM.*
DOWN.DLL
DWN.HLP

Содержание Assel-a-Writer-8300



















































































































































































































































































































































Отзывы: