Xante Assel-a-Writer-8300, Инструкция по эксплуатации

Страница: 180 / 338

5-12 Configuration bb ______________________________________
The DPI Menu
MISCELLANEOUS
DPI
600 x 600
1200 x 1200
The DPI menu allows you to select the default
printing resolution. The factory default is 600
x 600. 1200 x 1200 dpi can be selected if you
have the resolution upgrade installed.
Note: If you add a memory upgrade, higher
resolutions may appear in the DPI menu.
However, unless the corresponding
resolution upgrade has been added to your
printer, the copy will print incorrectly if
the higher resolution is selected.
The Gamma Menu
MISCELLANEOUS
GAMMA
0
1
2
3
4
5
6
linear
The Gamma menu allows you to use
XANTÉ’s Halftone Calibration Technology
to choose one of eight transfer curves to
control your printer output. Options are 0-6
and linear. O is no change; curves 1-5
progressively lighten the midrange grayscale
values; 6 is a negative print; and linear
allows you to use a custom curve created
with XANTÉ Linearizer and downloaded to
the printer. The factory default is 3.
See “Gamma” in chapter 6, “Gamma
Corrections” in chapter 8, and “Calibration
with a Densitometer” in chapter 3 (Macintosh)
or chapter 4 (PC).
The Initial Job Menu
MISCELLANEOUS
INITIAL JOB
YES
no
The Initial Job menu allows you to have the
printer execute a Sys/Start file, if one exists
on an external hard disk when the printer is
turned on. Options are to enable (YES) or to
disable (NO) this feature. The factory
default is YES.