Xante Assel-a-Writer-8300, Инструкция по эксплуатации

Страница: 238 / 338

9-4 Maintenance and Specifications bb ________________________
• Make sure that air vents are not covered and that air can move
freely around them. Never insert anything into the vents.
• Make sure the output tray does not overfill. Overfilling can block
media as it comes out and cause a printer jam.
• If the printer will not be used for an extended period (over
several days), unplug the power cord from the power source,
close the manual feed tray, and cover the printer with protective
plastic or a cloth.
• Store the printer only in an area with a temperature of 32˚ to 95˚
F (0˚ to 35˚ C) and a relative humidity of 10% to 80% with no
condensation.
Moving the Printer
Use the following guidelines when moving the printer.
• Never move the printer with the toner cartridge installed.
Remove the cartridge and place it in its original bag to protect it
from light. If you no longer have this bag, place the cartridge in a
dark bag or wrap it in a dark cloth.
• Make sure the toner cartridge stays level during the move. Then,
rock it gently to redistribute toner before placing the cartridge
back in the printer. For details, see “Handling the Toner
Cartridge” in chapter 7.
• Make sure the top cover and manual feed tray are closed.
• Remove all interface cables and the power cord.
• If a SCSI disk is attached, remove it.
• Always have help when you lift the printer. It weighs
approximately 44 lbs. (19.98 kg).