15
©2013 XAircraft All Rights Reserved.
Copter stays horizontal
Revolving slowly until slow green LED flashing
5.
Vertical Calibration A: Copter head up, and then revolve the copter slowly. Until LED shows
slow green flashing then enter next step.
Copter head up
Revolving slowly until LED flashing
6.
Vertical Calibration B: Copter side up, and then revolve the copter slowly. When LED shows
solid green calibration done. If solid red calibration failed.
Copter side up
Revolving slowly until LED solid on
7.
Repower on to continue. If calibration failed, please recalibrate after power on.
RC Neutral Point Calibration
1.
Cancel all trims on radio before calibration.
2.
Fast altering Flight Mode switch between modes. When LED flashing red and green, the
controller enters Calibration Mode.
3.
Center all sticks as the following picture, the LED shows double green flashing.
