10
www.xa.com/en
Smart Battery
With 6 high voltage lithium polymer power batteries and a BMS module, C500 Smart Battery, specially
designated for M500, provides real-time information such as voltage, current and temperature as well
as charging protection. It gives immediate feedback to the load side during use. In case of battery low
or failure, it will send an emergency stop signal initiatively to ensure the electrical safety of the load
side. There is one power button and four indicators shown as follows.
Power On/Off
Upon connection to the aircraft or the charger, long press the power button for at least 1 second until all
the battery level indicators flash simultaneously, followed by the other long press for at least 1 second
until the battery beeps and all the status indicators are on/off. Then the battery turns on/off.
Check the Battery Level
When the aircraft is off, short press the power button once to check the battery level.
When the aircraft is on, the battery level indicators stay on.
Power Button
Battery Level Indicator
