Remote control function name
Important safety information
Remote control and aircraft battery installation and charging instructions
Aircraft installation
2、Aircraft fan installation
3、Aircraft protection rack installation
Please read the instructions carefully before use (Please read carefully for details and
warnings) Save this manual for future reference
（
1
）
The product is not a toy, but the mechanical, electronic, aerodynamics, high-frequency transmission and
other professional knowledge into one of the fine Dense equipment, the need for proper assembly and
commissioning to avoid accidents. The product holder must use a safe way.Operation control: improper
operation, may cause serious personal injury or property damage. We are not responsible for this,Because we
can not control the assembly, use, operation process.
（
2
）
This product is suitable for people with operating model experience, the age of not less than 14 years of
age.
（
3
）
The flight site must be a local legal remote control model flight site.
（
4
）
Once the product is sold, we will not be responsible for any safety and safety arising from operation and
use, control, etc.
（
5
）
If any using, operating and measuring problems, please contact with local distributors, for we have
assigned those distributors to provide technical support and after sales service.
2.Safety Precautions:
Remote control model aircraft is a high-risk goods, must be away from the crowd when flying. Artificial
assembly or body damage, electronic control.Improper equipment, and operation are not familiar with, are
likely to cause damage to the aircraft or personal injury and other unpredictable accidents. please.Pilots must
pay attention to safety, and need to understand due to their own negligence caused by accidental
responsibility.
（
1
）
Away from obstacles and crowds
The flight of the remote control flight has an uncertain flight speed and state, there is a potential risk. Fly
away from the flight.People, high-rise buildings, high-voltage wires, etc., while avoiding wind and rain,
thunderstorms and other bad weather flight to ensure that pilots,The surrounding population and the safety of
the property.
（
2
）
Away from the damp environment
The interior of the aircraft is made up of many sophisticated electronic components and mechanical parts,
so it is necessary to prevent the aircraft from wet or Into the body, so as to avoid mechanical, electronic
components failure caused by accidents!
（
3
）
Safe operation
Please operate the remote control aircraft according to your own status and flight skills. Fatigue, poor spirit
or improper operation will increase. Probability of accidental risk.
（
4
）
Keep away from high-speed rotating parts
When the propeller in the high-speed flight, the pilot, the surrounding crowd and objects away from the
rotating parts, so as to avoid danger and damage.
（
5
）
Keep away from heat
Remote control aircraft is composed of metal, fiber, plastic, electronic components and other materials, so
as far as possible away from heat, to prevent day.Drying, to avoid deformation caused by high temperature or
even damage.
As shown in the figure according to the
electrode box electrode instructions (+ / -)
Place the battery correctly (as shown).
The aircraft battery is charged
Remote control battery installation:
3、A key to start and a key landing
1、Mobile phone rack
2、2.4G frequency
4、Flight control
2. Connecting the aircraft power supply:
Put the charged battery into the battery holder of the aircraft, and then place
the battery plug at the power supply on the vehicle Into the socket for power
connection, connected to open the aircraft power, then the aircraft lights.
1. Connect the USB cable to the computer to charge:
USB charging end connected to the aircraft battery
plug, the other end can be connected to the computer
USB port to charge the battery, charging lights, full
when the lights off.
The aircraft rises
The aircraft descends
Push the left lever upwards
Push the right lever upwards
Push the right lever down
Push the left lever down
A.Throttle (left lever)
B.Forward and backward (right lever) (with camera front side)
The aircraft is backwards
The aircraft is advancing
5、Fine-tuning control (with camera front side)
A key return
C.Left and right side fly
D.Turn left and right (with camera front side)
Push the right lever to the left
The plane flew to the right
The plane flew to the left Push the right lever to the right
Aircraft
turn left
Aircraft
turn right
Turn the left lever to the left
Turn the left lever to the right
Forward and backward fine tuning
About fine tuning
Take off when the body forward offset, after
the micro Adjustment is correct
Take off the body when the offset, according
to the former micro Adjustment is correct
Take off the body when the left shift, according
to the right micro Adjustment is correct
Take off the body when the right shift, according
to the left micro Adjustment is correct
Directional definition and mode selection of headless mode
X
X
front
Head forward
Press a key return, the aircraft will give up their own front and rear
left and right direction, automatically defined by the headless
mode of backward direction of flight, when the control of the right
lever when the stop this function
* Note: This feature can only be done automatically and the flight
can not be reached automatically.
Speed file is to advance, back and left and right side of the flight is
divided into third gear speed, the remote control is turned on by
default when the slow power, press the remote control button
issued a "flute" "flute" twice as midfielder, "flute" "" Flute "press
three times for the fast file," flute "soon return to slow file.
(Recommended beginners with slow operation)
1. The reset setting is a horizontal reset of the six-axis gyroscope
on the aircraft, and the micro adjustment of the remote control.
2. The operation before the aircraft in the horizontal position,
Push the stick as the picture, 2 seconds after the remote control
issued (flute) sound, the aircraft quickly flashing lights a few
times that the reset set successfully.
3. This function is generally not used, only for aircraft maintenance
adjustment or aircraft when a serious offset
* Emergency landing
1. During the flying time if need urgent stop，
press the button（as picture shown）,the drone will
stop working.（Please do notattemp this operation
while the drone regular flying in high altitude）
2.When the drone lean over 45 degrees，it will stop
for protect the engine.
3. When use the App control the drone，slide the
throttle down，and press the one key take off button，
it will emergency landing.
Speed selection
The remote control controls the recording
Aircraft settings reset
Problem guide
Remote control and UFO is not successful
UFO lithium battery power shortage
Charge the battery or replace another fully charged battery
Please re-perform the remote control and the flying saucer
1. Check if the remote control and the flying
saucer are powered on
2. Check whether the remote control and the
UFO battery are in a low power state
3. Is the battery positive and negative
1. The main rotor deformation
2. UFO battery power shortage
1. Replace the main rotor
2. Charge or replace the battery with another battery
1. Replace the main rotor
1. Turn on the remote control and insert the UFO battery.
2. Use full charge Full battery 3. Reinsert the battery and
confirm that the battery and battery are positive or negative
Pole piece of contact is normal.
Main rotor deformation
The gyroscope is not at all right
The gyroscope is not at all right
The remote control can be automatically corrected mode,
or restart the re-frequency
The remote control can be automatically corrected mode,
or restart the re-frequency
The original for
Approach
Ask questions
Connect the flying saucer
batteries and flyThe indicator
light on the dish continues
Flicker, operation no response
Connect the flying saucer
battery.There's nothing wrong
with the orbiter should.
Push the throttle lever.The
motor does not turn and flies
The indicator light on the disc
starts flashing
The flying saucer main rotor
continuesTurn but cannot take off
The flying saucer vibrates badly
The flying saucer fell behind
and lost flat On the fly.
The flying saucer will still go
on or on After moving
Product main accessories name
The plant is made of lithium polymer battery（LiPo）
Lithium batteries are different from the general battery, which consists of a thin layer of thin paper wrapped
with its chemical endoplasm. This can be great.To reduce its weight, but it makes it more vulnerable in the
face of rough or inappropriate operations. Like the same.There is a battery, as inappropriate operation will
cause a fire explosion.
1. The direction of the aircraft before departure: the direction
of the aircraft forward in front of you,(With the camera side for
the front) remote control to the end of the direct flight and
then press a key.Take off, that is, to complete the flight head
mode direction definition.
2. When flying by the headless mode of the remote control
issued a "flute, flute" twice, the aircraft lights Light flashing
into the headless mode. And then press the remote control
issued a "flute" sound Exit the headless mode.
Do not put the battery in the model for charging, which may cause the battery to
fire and damage you of the aircraft.
If you plan to use this product for one week or more, keep the battery 50% Increase the
battery life. Keep the battery 50% of the battery, just use the battery when fully charged
Half of the time to charge.
Please use the original professional charger to charge the battery.
Do not charge the carpet to prevent fire.
Lithium battery in the storage for more than three months after the need to charge to
maintain the voltage to ensure that it should have of life.
!
1、Folding function display
Remote control
Open the aircraft power switch, the aircraft
placed in the flat Ground, then the aircraft
indicator light flashes, open the remote
control power.Source switch, the throttle
joystick pushed to the highest after the
pull to the lowest,Buzzer prompt "tick"
sound! The aircraft indicator light is on, right
Frequency to complete, then you can take off!
Download APP connection
Partial rear
Partial front
Left side
Right side
When folding, please fold the back
Show arms, and then folded in front
of the arm,Expand the opposite!
Download real-time aerial photography software "JY UFO", so that the aircraft
during the flight FPV real-time transmission.
Before use, please open the aircraft power switch, the aircraft on the flat ground,
open the phone WiFi link interface,Connect WiFi name to (WiFiUFO - ###) as
shown in Figure 1.
For the Apple IOS system
APP "JY UFO"
(Please scan this two-
dimensional code to
install this software)
Used for foreign
Andrews system
APP "JY UFO"
(Please scan this two
-dimensional code to
install this software)
For the domestic
Andrews system
APP "JY UFO"
(Please scan this two
-dimensional code to
install this software)
Video, camera keys (and mobile phone APP on the video, take
pictures of a key, when using the remote control to control the
aircraft through the remote control on the video, like the camera
can also start WIFI film video or camera)
prompt:
1.WIFI aerial version of the phone after 20 seconds after the phone
can find WIFI connection and remote control to start the video or
take pictures
2. When there is no connection to the APP must be guaranteed
WIFI flight card on the SD card storage space remote control
camera on the camera button has a role.
Pull out the remote control lower
bracket, clamp the phone.
When converting to headless mode, the aircraft will give up
its front and rear azimuths, and reposition the front and rear
with the remote control as a reference point. Such as: when the
right lever to push forward, the aircraft will fly away from the
remote control; when the right lever to pull back, the aircraft
will fly to the remote control. (With camera front side)
switch
Tip: This product is determined by the
barometer.In a variety of environmental
temperature and other factors,The aircraft
will automatically start when flying or low
voltage.Appear high and low changes are normal!
45°
figure 1
figure 2
Figure 3
3.WiFi connected later, open the APP, enter the main interface, as shown in Figure 2,
Click "Play" to enter the user interface, as shown in Figure 3, click "" to enter ordinay
control interface, click "" "Altitude hold " key to become"Black", enter the "Altitude
hold " interface.
4. When the video connection is successful, you can see the WIFI camera through the
phone screen Transfer the image.
Please follow the correct direction to install the propeller, propeller
on the sign.Installed to the upper left corner of the aircraft and the
lower right corner of the arm, with the phase.With the propeller on
the sign B mounted to the upper right corner of the aircraft and the l
ower left.Corner of the arm, the installation of the fan folder when
the alignment of the cone assembly Square accessories, installed in
place after the locking screw!
The protective frame at the aircraft arm position
(pictured)Install fastening.
A
A
B
B
1
2
3
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
31
4
5
2. Key function description
1. Accelerator
2/3. Left / right rotation
4/5. Left and right side fly
6/7. Forward, backward
8/9. Forward / backward trim
10/11. Left / right spin fine tuning
12/13.Left / right side fine tuning
14. Take pictures
15. Video recording
16.Media Library
17. Speed: 30% / 60% / 100%
18. Set high
19. Gravity sensing mode
20. Show / hide virtual joystick
21. Show / hide settings
22.The lens is reversed
23. 3D display
24. Headless mode
25. Gyro calibration
26.Custom route
27. 360 ° roll
28. A key stop
29.A key to take off
30.A key drop
31.A key to unlock
32.Voice command control
Control of aircraft commands:
Move forward, back, fly on the
right, fly on the left
1
2
1、The gravity sensor mode: click on the icon to enter
the gravity sensor mode, after the success of the icon
shows the yellow, so that you can shake the phone to
control the aircraft forward, back, left fly, the right side
of the fly. Click the icon again to return to the bar
model!
2, take pictures: the aircraft flying to the air, control the
direction to the need to take pictures of the location,
click the camera icon,each shot a picture! After shooting
to control the direction of the remote bar to change the
camera target! Each time taking pictures for 0.5-1
seconds,
1
2
Note: Before operating this function, you must skillfully
operate the four-axis aircraft.
figure 1
figure 2
3. Unlock the four-axis aircraft
Open the four-axis aircraft power switch, click on the high icon in Figure 1, and then click on the
button in Figure 2 to unlock the icon, this time the aircraft propeller low-speed rotation.
Note: The camera lens of the four-axis aircraft indicates the front of the aircraft
rise
turn right.
turn left
decline
Push the left joystick (throttle), the main
motor speed increases, the four-axis
aircraft rise. Push down the left joystick
(throttle), the main motor speed down,
four-axis aircraft down.
Left push the left joystick (throttle), turn left
the four-axis aircraft,push the left joystick
to the right (throttle), turn right at the
four-axisaircraft.
If the four-axis aircraft drifts directly to the left
when taking off, press the right side to fine-tune
the key until it returns to normal.
If the four-axis aircraft is moved backwards forward,
press the forward trim key until it returns to normal.
If the four-axis aircraft drifts directly to the right
when taking off, press the left side to fine-tune
the key until it returns to normal.
If the four-axis aircraft moves forward directly
forward, press the back-tune key until it returns
to normal
Note: When the four-axis aircraft is less than 30 cm
from the ground, it will be affected by the eddy currents
generated by the ground, and will become unstable,
which is the "ground effect", the more the four-axis
aircraft,the greater the ground effect force.
forward
backward
Left fly
Fly on the right
Push the right joystick up (rudder), the four-axis
aircraft to moveforward; push down the right joystick
(rudder), the four-axis aircraft to the back.
Push the right joystick to the right (rudder), the right
side of the four-axis aircraft, and the right lever
(rudder) to the left, the left side of the four-axis
aircraft.
Note: Push the left joystick (throttle) to take off. When thefour-axis
aircraft is turned in the air or laterally, use the fine adjustment
function to correct the action.
If the four-axis aircraft take the clockwise rotation,
adjust the right-hand fine-tune key until it returns
to normal.
If the four-axis aircraft take off directly counter
clockwise rotation,then adjust the left rotation
fine-tuning key,
01
02
03
04
05
06
07
08
09
10
11
12
13
Number
Name
Main body cover
Motor
Main body
under cover
Leaves
Front left axis
Front right axis
USB charger
Camera board
Behind left axis
Behind right axis
Gear
Battery
Quantity
Quantity
Number
Name
01
02
03
04
05
06
07
08
09
10
11
12
13
1
4
4
1
1
1
4
1
1
1
1
1
PCB board
1
