X-Rite SP52, Руководство оператора

Страница: 15 / 42

O V E R V I E W A N D S E T U P
1-5
1.7
Instrument I/O Serial Interface
The instrument is connected to your ColorDesigner system
computer using an interface cable.
To install the interface cabling:
1.
Insert the modular end of the interface cable into the I/O
port located on the back of the instrument. The cable
connector “clicks” when properly attached.
2.
Attach the other end of the cable to an available serial port
on your computer.
1.8 Attaching the Wrist Strap
A security wrist strap is included to safeguard against
accidentally dropping of the instrument. The strap is attached to
the instrument by simply securing the clasp to the designated
location on the back of the housing. Adjust the strap by sliding
the sleeve to tighten around your wrist.
Connection Location
Strap Clasp
Adjustable Sleeve
Serial I/O Port