X-Rite SP52, Руководство оператора

Страница: 12 / 42

C H A P T E R O N E
1-2
1.2 Unpack and Inspect
After removing the instrument from the shipping carton, inspect it
for damage. If any damage has occurred during shipping,
immediately contact the transportation company. Do not proceed
with installation until the carrier’s agent has inspected the damage.
Your instrument was packaged in a specially designed carton to
assure against damage. If shipment is necessary, the instrument
should be packaged in the original carton. If the original carton
is not available, contact X-Rite to have a replacement carton
shipped to you.
1.3 Install the Battery Pack
The instrument is shipped from the factory with the battery pack
removed. The battery pack is located in a carrying case
compartment and must be installed before the instrument is used.
1.
Hold the shoe next to the instrument housing and lift
upward on the spring-loaded latch
(refer to Unlatching the
Instrument Shoe) . Open the shoe perpendicular to the
instrument housing.
2.
Carefully rotate the instrument over and rest it on its top.
3.
Slide the battery pack into the compartment with the battery
connector facing down and to the back of the instrument.
4.
Press down on the pack until the connector is properly
seated and the tabs click into position.
Battery Connector
Battery Pack