M A - 5 Q C S P E C T R O P H O T O M E T E R
9
INTRODUCTION AND SETUP
The multi-angle spectrophotometer is designed for consistent, precise color measurement of metallic,
pearlescent, and other complex special effect finishes.
This manual covers the installation, operation and maintenance of the instrument. Specific instructions for using
the instrument with your software application can be found in the software documentation.
Key features of the instrument are:
•
Color display with touch screen operation
•
Power on/off and measure button
•
Three contact sensors located on the bottom of the instrument to aid in proper positioning
Packaging
Your instrument packaging should contain all the items listed below. If any of these items are missing or
damaged, contact X-Rite or your Authorized Representative.
•
MA-5 QC instrument
•
USB interface cabling
•
Calibration reference
•
Safety strap
•
Screen protector
•
Spare light seal
•
Targeting shoe
•
Stylus
•
Certificate of
Performance
•
MA-3 and MA-5 Spectrophotometer Safety/
Compliance Information and Getting Started
document
•
Carrying case
Powering On
The power/measure button is used to initiate the instrument from a
power off state. Simply press the button (1) for about one second to
turn on the instrument. If the instrument does not power up after
pressing the power button, the battery may require charging. Refer to
Charging the Battery section. The instrument is also powered on by
plugging the USB cable into your computer’s USB port.
Powering Off
The instrument turns off automatically after two hours of nonuse. It is
not required to turn off the instrument manually. If you want to
manually power off, tap the power icon at the bottom of the Home
screen and then tap
Power Off
to confirm.
Touch screen
Indicator LEDs
Power on/off and
measure button
(1)
Safety strap
connection, optional
USB input
