M A - 5 Q C S P E C T R O P H O T O M E T E R
14
SETTINGS MODE
Settings mode is used to adjust and view the instrument’s settings. You should review the current settings
before using the instrument for the first time. However, you can go back and change these settings at any time.
Entering Settings Mode
1.
From the Home screen, tap the
Settings
icon to access the Setting screen.
2.
Tap the Settings option you want to edit or activate. Down (
▼
) and Up (
▲
) arrow icons appear on the
screen when some settings cannot be accessed from the main view. Tap the arrow icons to view the
additional settings.
3.
Tap the option required.
4.
When finished with the options, tap the Left (
◄
) arrow at the bottom to return the screen to the Home view.
5.
Refer below for information on configuring each Settings option.
Calibration
This option is used to activate the calibration procedure. Calibration can also be accessed from the
Home screen.
To access, tap
Calibration.
Refer to the Calibration mode section later in this manual for detailed information on
performing a calibration. After a successfully calibration procedure, you are prompted to execute a self test to
check the correct functionality of the instrument.
Self Test
This option is used to run a self test of the instrument to check the correct functionality of the instrument.
1.
To activate, tap
Self Test
and then place the instrument on the white calibration tile.
2.
Tap the
Start
icon in the display. The self test goes through 10 steps.
