X-PERFORMER XPCACG20LI, Оригинальное руководство пользователя

Страница: 42 / 60

A=5-7mm Figure.8
4.5.3. Check the connections of the safety thermostat and of the thermocouple: they must
always be clean.
If necessary clean the fan blade and the inside of the heater using compressed air.
5 . DESCRIPTION OF ARTIULES
▶▶
5.1. POWER SUPPLY UNIT (when applicable):
THE POWER SUPPLY UNIT DOES NOT CHARGE THE BATTERY.
The heater can be connected to the mains using a device called the power supply unit. The
power supply unit receives single phase alternating current from the mains and converts it
into direct current for running the heater. The operating parameters for the power supply unit
see the data plate affixed to the power supply unit) must be observed. Use the power supply
unit in completely dry, dust-free environments to power only this heater. Check the power
supply unit's cable regularly for wear, in order to avoid serious damage. Observe all the
warning the power supply unit in this manual.
▶▶
5.2.BATTERY (when applicable):
The heater can operate autonomously using an original Li-ion rechargeable battery, without a
mains connection. The rechargeable battery is provided only partially charged, It is
advisable, therefore, to fully charge the battery before initial use. Use only original batteries
to power the heater. Observe all the warning messages relating to the battery in this manual.
▶▶
5.3. BATTERY CHARGER (when applicable):
The battery charger is designed to charge original rechargeable batteries. The operating
parameters for the battery charger (see the data plate affixed on the battery charger) must
be observed. Use the battery charger in completely dry, dust-free environments to charge
only the original rechargeable batteries used to power this heater. The battery charger is
designed to automatically charge the rechargeable battery when connected. A set of LED