X-PERFORMER XPCACG20LI, Оригинальное руководство пользователя

Страница: 41 / 60

FUEL GAS ODOR
PROPANE gas and natural gas have manmade odorants added specifically for
detection of fuel gas leaks.
If a gas leak occurs you should be able to smell the fuel gas. Since Propane
(PROPANE) is heavier than air you should smell for the gas odor low to the floor. ANY
GAS OROR IS YOUR SIGNAL TO GO INTO IMMEDIATE ACTION!
1. Do not take any action that could ignite the fuel gas. Do not operate any electrical switches.
Do not pull any power supply or extension cords. Do not light matches or any other source
of flame. Do not use your telephone.
2. Get everyone out of the building and away from the area immediately.
3. Close all propane (LP) gas tank or cylinder fuel supply valves, or the main fuel supply valve
located at the meter if you use natural gas.
4. Propane (LP) gas is heavier than air and may settle in low areas. When you have reason
to suspect a propane leak, keep out of all low areas.
5. Use your neighbor’s phone and call your fuel gas supplier and your fire department. Do not
reenter the building or area.
6. Stay out of the building and away from the area from the area until declare safe by the
firefighters and your fuel gas supplier.
7. FINALLY, let the fuel gas service person and the firefighters check for escaped gas. Have
them air out the building and area before you return. Properly trained service people must
repair any leaks, check for further leakages, and then relight the appliance for you.
4. MAINTENANCE
4.1. The repairs or maintenance operations must only be carried out by qualified personnel.
4.2. The unit must be checked by a qualified technician at least once a year.
4.3. Regularly check the conditions of gas hose, and gas regulator if it must be replaced only
use original spare parts.
4.4. Before starting any maintenance operation on the heater disconnect from both gas and
electrical suppliers.
4.5. If the unit has not been used for a long period we advise that a technician carries out a
general check up before using. It is important to control the following:
4.5.1. Periodically check the gas supply hose conditions and, should it be changed, use only
original spare parts.
4.5.2. Check the starting electrode position (see Fig.8).