X-PERFORMER XPCACG20LI, Оригинальное руководство пользователя

Страница: 40 / 60

c. As the flame lights up, keep the valve button pushed for 10 seconds approx. Should the
heater stop when the valve button has been released, wait one minute and repeat the
starting operation keeping the valve button pushed for a longer time.
d. Regulate the gas flow pressure according to the thermal power desired, by turning the
wheel of the pressure reducer anticlockwise to increase the pressure or clockwise to
decrease.
e. Contact your supplier should any problem continue.
CAUTION
If ignition is difficult or irregular before repeating the ignition operations make sure
that the fan is not locked and the air inlet and outlet are unobstructed.
3.2 SWITCH OFF
To stop the heater, shut off the gas cylinder tap. Let the fan run until the flame shuts down
and then turn the fan switch to position OFF
3.3 AIR CONDITIONING
a. The heater can also be used as a ventilator.
b. In this case remove the gas supply hose and connect the plug of heater to a suitable
electrical supply.
c. Set the fan switch to position ON.
ODOR FADE WARNING
！！！
WARNING
Asphyxiation Hazard
1. Do not use heater for heating human quarters.
2. Do not use in unventilated areas.
3. The flow of combustion and ventilation air must not be obstructed.
4. Proper ventilation air must be provided to support the combustion air requirements of the
heater being used.
5. Lack of proper ventilation air will lead to improper combustion.
6. Improper combustion can lead to carbon monoxide poisoning leading to serious injury or
death. Symptom of carbon monoxide poisoning can include headaches dizziness and
difficulty in breathing.