26
X-Oven.2 / January 2017
The recommended load of X-Oven’s charcoal for the X-Oven.2 model is
6 kg
for approximately
5/7 hours
of use depending on the expected workload,
see
Chart 1
.
For a service exceeding 6 hours
, the Manufacturer suggests to re-load
the Brazier tray after about 4 hours from ignition. We advise to wait about 30
minutes from re-load before starting to cook again.
If the
service is performed twice daily
(i.e. lunch and dinner), the Man-
ufacturer suggested to load 4 Kg. of X-Oven’s charcoal for lunch and an ad-
ditional 4 Kg. for dinner (to be added on top of the charcoal residue from
lunch). We advise to wait for about 30 minutes from re-load before starting
to cook again.
The Manufacturer underlines the fact that the information supplied regarding
the quantities of charcoal to be used and the expected service time were cer-
tified with the use of X-Oven’s charcoal, see
Charcoal
. The use of a different
charcoal could considerably influence the performances of the product, the
amount of charcoal to be used and the duration of service.
RECOMMENDED USE
The X-Oven.2 allows to cook simultaneously a variety of food, of various cut
sizes at different cooking temperatures.
The operator can adjust the heat intensity in different ways:
•
The knob on the
Brazier lifting cart
allows to move the Brazier tray closer
or further away from the grills
•
The food can be placed on
two different Grill drawers
at various distanc-
es from the Brazier tray
•
The
Air inlet valve
can be opened or closed to speed up or slow down
combustion
Moreover, the operator has the possibility to use the
Brazier tray load
splitter
, see
Image 17
, to practice special cooking techniques, such as
hot-
smoking
or
indirect cooking
. The capacity of the Brazier tray is partialized
and the charcoal load reduced, therefore the result is to free a portion of the
grills of the Grill drawers above from direct heat.
