X-laser SKYWRITER HPX MF-20 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 66

background image

Legal NoAce

1. Before using this product, it is the responsibility of the user to be familiar with all Federal and

State reporAng and usage requirements for high powered laser demonstraAon equipment. Laws
vary by state. Refer to the included user USB drive for more informaAon.

2. In the United States, federal law requires that this product be operated by an FDA

variance holder or an authorized and adequately trained employee under the
supervision of an FDA variance holder. In all cases, this product should only be
operated by qualified personnel and should be kept inaccessible to unauthorized
persons before, during, and after use. Keep away from minors.

3. The labels and emission indicator on this product are required for compliance with US Federal

law and internaAonal standards and must be kept on the unit, visible, and in legible condiAon at
all Ames. Do remove any labels and do not cover the emission indicator or laser aperture label
under any circumstances. If any labels become damaged, contact X-Laser for replacement.

4. This product must be cerAﬁed by the manufacturer to comply with US Federal requirements for

laser demonstraAon equipment a]er manufacturing, modiﬁcaAon, or alteraAon. The use of
laser demonstraAon equipment that has not been recerAﬁed by the manufacture a]er any
alteraAon or modiﬁcaAon is a violaAon of US Federal RegulaAons.

5. To maintain compliance with US Federal requirements, this product must only be operated and

serviced in accordance with the manufacturer’s speciﬁed procedures, including the procedures
described in this manual.

Failure to comply with federal, state, or other applicable laws, codes, and/or standards of pracAce
when using this product may cause serious and permanent injury and may result in civil or criminal
penalAes including ﬁnes and jail Ame. Such failures to comply may be grounds for cancellaAon of
liability or other insurance policies and increase the liability exposure of the user.

Unpacking Your Laser Projector

Your new X-Laser Skywriter HPX MF-20 laser projector box should contain the following items:

1. X-Laser Skywriter HPX MF-20 laser projector

2. A grounded PowerCon True1 cable

3. Laser projector key

4. etherStop terminator

5. “Black wrap” beam blocking foil

6. A USB key containing this manual, le6ers, forms, and a wealth of other informaAon about this

product and laser safety in general

7

«
...
5
6
7
8
9
...
»

Содержание SKYWRITER HPX MF-20



































































Отзывы:

Нет отзывов

Похожие инструкции для SKYWRITER HPX MF-20

Бренд: Marantz Страницы: 66

Бренд: Barco Страницы: 2

Portable Series

Бренд: BenQ Страницы: 61

Бренд: Maxell Страницы: 22

Бренд: Optoma Страницы: 58

Бренд: DNP Страницы: 2

Бренд: SCREENLINE Страницы: 8

Office Theater PJ820

Бренд: ViewSonic Страницы: 67

Бренд: ViewSonic Страницы: 2

Бренд: Canon Страницы: 9

Бренд: Canon Страницы: 8

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 36

SX50 - REALiS SXGA+ LCOS Projector

Бренд: Canon Страницы: 93

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 10

Бренд: Panasonic Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды