7
US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
APPLICA
TION, RJ45 TERMINA
TION AND CA
T5E/6 CABLE DIST
ANCE AND INITIAL CONNECTION
Rear
1
12V DC power input
- Threaded port for standard or locking connection
- Two-pin phoenix port for additional power connection
2
UTP IN
Connects to an HDBaseT transmission device, such as a
Matrix, Presentation Switcher or Transmitter.
NOTE: Transmission device must be PoH-enabled to
remotely power the RX-POH-70.
3
HDMI OUT
Connects to display device
4
IR RX
Connects to an IR receiver positioned on or near a display
device to enable control of a source from the display location
5
IR TX
*VUULJ[Z[VHU09LTP[[LYÄYTS`H[[HJOLK[V[OLKPZWSH`KL]PJL
IR receiving area to enable control of the display from a source
location.
6
RS-232
WPU9:MVYÄYT^HYL\WKH[L
2
3
4
5
6
1
Applications
WyreStorm HDBaseT PoH Matrix as Transmission Device
KEY
HDMI
/+)HZL;*H[
099:
HDBaseT Transmission Device
(WyreStorm MX-0808-PP-POH shown)
/+)HZL;
*H[LH
HDMI
HDMI
RS-232
RS-232
IR to Control
:`Z[LT
*()093052
:VSK:LWHYH[LS`
IR Emitter
IR Emitter
IR Receiver
/+40:V\YJL
/+40+PZWSH`
NOTE: Serial control at the display end requires a compatible HDBaseT transmission device featuring routable RS-232.
RS-232 offers firmware updates only if connected to a non-routed RS-232 transmission device.
RJ45 Termination and Cat5e/6 Cable Distance
Pin 1
Pin 8
Wire colors shown follow EIA/TIA-568B standard.
Pin 1:
Pin 2:
Pin 3:
Pin 4:
Pin 5:
Pin 6:
Pin 7:
Pin 8:
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
