WUNDER SA.BI.SRL USER MANUAL
AGS INOX REV.01 04/12/2016 8
Check
Is the LO-BAT INDICATOR on?
Action
Apply the power adaptor
Syndrome
Rated capacity cannot be reached
Check
Is the NET INDICATOR on?
Action:
Turn the scale off. Remove all loads from platter and turn on again.
Check
Is there anything obstructing the platter?
Action
Remove all obstacles.
Syndrome
Weighing result is not accurate
Check
Is the scale placed in a level condition?
Action
Adjust the adjustable feet to a level condition.
Check
Is the scale affected by airflow, vibration or RFI?
Action:
Place the scale away from all disturbances.
Check
Is the scale calibrated correctly?
Action
Contact your dealer.
Check
Is the correct weight unit employed?
Action
Refer to 5.3 for weight unit setting and usage.
Syndrome
Display shows 00000 after counting down
Check
Is the load applied to platter excess the rated capacity of scale?
Action
Remove all loads from platter and try again.
7. DAILY CARE AND MAINTENANCE
7.1
Clean the scale with a soft and damp cloth. If necessary, apply a mild detergent.
7.2
Do not use any harsh, abrasive material, acetone, volatile solvent, thinner or alcohol for cleaning.
7.3
Verify the accuracy of scale periodically. Re-calibrate the scale if necessary.
NOTE: In some countries, calibration requires authorized/qualified agent. Contact your dealer for more information.
7.4
It is a good practice to apply the dust cover when operating the scale.
7.5
The scale must be placed horizontally during transportation or long time storage.
7.6
Remove platter from scale before transportation or long time storage.
7.7
Store scale in a dry and clean place.
