WUNDER SA.BI.SRL USER MANUAL
AGS INOX REV.01 04/12/2016 6
pressing ON/ZERO
5.7 TARE OFF THE WEIGHT OF A CONTAINER
When a container is used, follow the below steps to manually tare off the weight of container and get the net weight.
a.
Remove all loads away from platter
b.
Make sure that the ZERO INDICATOR is on
c.
Place the container on the platter
d.
Press TARE
After TARE is pressed, the NET INDICATOR would appear.
Refer to 5.2 for weighing procedures. Weight displayed under is the net weight of the subject matter. Refer to
SPECIFICATIONS for maximum tare range.
NOTE:
- When scale is set at OIML and application is legal for trade. User only needs to press TARE once when tare off a weight.
The tare function will take place when reading is stabled
- When scale is set at Non-OIML and application is not legal for trade. User can tare off the weight anytime when
pressing TARE
5.8 CLEAR THE TARE FUNCTION
a.
Remove all loads from platter
b.
The tare effect will be cancelled:
-Automatically if automatic tare function is employed, or
-By pressing TARE
c.
After TARE is pressed, the NET INDICATOR would disappear.
5.9 MEMORY FUNCTION
5.9.1 How to Accumulate a Weighing Result to Memory
a.
Refer to 5.2 to 5.3 for weighing
b.
Press M+ to save and accumulate the result to memory.
c.
Scale will display “P. X” and then follow by the accumulated weighing result stored while both M+ INDICATOR and
MEMORY RECALL INDICATOR appear pointing to M+ and MR on the overlay respectively
d.
Scale return to normal after 2 seconds and MEMORY RECALL INDICATOR will turn off automatically but M+
INDICATOR will remain on display to indicate that memory contains a stored data
e.
NOTE 1: “P. X” means the total number of transactions accumulated to memory
f.
NOTE 2: No weighing result will be stored to memory if it is less than the minimum load. Please refer to
SPECIFICATIONS for more information
