WUNDER SA.BI.SRL USER MANUAL
AGS INOX REV.01 04/12/2016 7
g.
NOTE 3:
h.
- When scale is set at OIML and application is legal for trade. User only needs to press M+ once when trying to store
a value to memory. The weight accumulation function will take place when reading is stabled
i.
- When scale is set at Non-OIML and application is not legal for trade. User can save the shown value to memory at
anytime when pressing M+
j.
5.9.2 Memory Recall
k.
a.
Press MR
l.
b.
Scale displays “P. X” and then follow by the accumulated weighing result while MEMORY RECALL INDICATOR
appears pointing at MR
m.
c.
Scale return to normal after 2 seconds and MEMORY RECALL INDICATOR will switch off with only M+
INDICATOR remain on display.
5.9.3 Memory Clear
a.
Press MR and TARE at the same time
b.
Scale displays “P. 0” and MR INDICATOR at the same time and return to normal after 2 seconds and M+ INDICATOR
will switch off
5.10 EXTENDED DISPLAY
This scale is equipped with extended display function for reference purpose only. To activate the function, press and
hold MODE for 2 seconds and display will flash the extended digit for 5 seconds before return to normal.
5.11 RECHARGE THE SCALE
The scale is equipped with a built-in rechargeable battery. When the LO-BAT INDICATOR appears, recharge the scale
immediately. Failure to do so may cause unrecoverable damage to the rechargeable battery.
6. TROUBLE SHOOTING
Syndrome Scale cannot be turned on
Check:
Is the scale charged?
Action:
Recharge the scale for at least 8 hours before first time use or plug in the power adaptor before power
on the scale.
Check
Is the power adaptor inserted properly into both the electricity outlet and the DC inlet of scale.
Action:
Secure both ends of the power adaptor and try again.
Syndrome
Scale turned off automatically
Check
Is Auto Power Off Function employed?
Action
Refer to 4.2.2 to disable Auto Power Off Function.