wtw photoLab 7100 VIS, Руководство по эксплуатации

Страница: 29 / 48

photoLab
®
7100 VIS Operation
29 ba77095e03 10/2017
4.4.2 Measuring reagent tests with AutoSelector
On one side, the AutoSelector has a bar code encoding a method number.
When the AutoSelector is inserted in the round cell shaft, the bar code is
automatically read and the relevant method selected by the photometer.
1 Open the cell shaft cover.
2 Insert the AutoSelector in the
round cell shaft so it touches the
bottom. When doing so, align the
line mark with the notch at the
front of the round cell shaft (see
section 4.2.4 I
NSERTING A CELL
).
The photometer selects the cor-
rect method with the aid of the bar-
code.
3 Insert the rectangular cell. The
correct measuring range is auto-
matically selected when the rect-
angular cell (1, 2, 5 cm) is
inserted.
The photometer starts measuring
automatically.
4 Further options:
– Select a different citation form
with [Citation form] ,
(e.g. NH
4
<–> NH
4
-N).
– Select a different measuring
unit with [Unit] ,
(e.g. mg/l <–> mmol/l).
– Make further settings with
[Setup] .
<HOME>
Concentration
Concentration 16.01.15 9:52
Please select method for measuring
or insert a barcoded cell
or insert AutoSelector.
Setup
Method list Last method New Method
Concentration 16.01.15 9:52
1.92
mg/l
18: 14752 NH
4
-N
10 mm 0.05 - 3.00 mg/l
Setup
Method list
Citation form Unit