wtw photoLab 7100 VIS, Руководство по эксплуатации

Страница: 40 / 48

What to do if... photoLab
®
7100 VIS
40 ba77095e03 10/2017
Connected printer
does not print
Data transmission
to USB memory
device does not
work
– Lamp test :
– If no light leaks out at the rear
side of the photometer:
Lamp defective
– If light does leak out at the rear
side of the photometer:
– Replace the lamp (see section
5.1)
– Carry out software update
– Wavelength calibration :
– Foreign particle in the cell shaft
– Lamp defective
– Lens smudged
– Instrument defective
– Remove foreign object
– Replace the lamp (see section
5.1)
– Clean the lens (see section 5.3.3
or section 6.1).
If this happens repeatedly, check
the operating conditions (see
section 3.1)
– Please contact the service
department.
Cause Remedy
Cause Remedy
– Printer not suitable – Connect a printer that is able to
interpret one of the required
printer control languages (PCL 3,
PCL 3 Enhanced, PCL 5, PCL
5c, PCL 5e, PCL 6 Standard)
Cause Remedy
– Connected USB memory device
was not recognized
– The USB memory device has
been formatted to a file system
which is not supported, e. g.
NTFS
– Use other USB memory device
– Format the USB memory device
to the FAT 32 file system