wtw photoLab 7100 VIS, Руководство по эксплуатации

Страница: 12 / 48

Commissioning photoLab
®
7100 VIS
12 ba77095e03 10/2017
3 Commissioning
3.1 General notes on handling
The photoLab
®
7100 VIS photometer is an optical precision meter. There-
fore, it should always be handled with care, especially in mobile use. Always
protect the meter from conditions that could damage the mechanical, optical
and electronic components. Heed the following points especially:

The temperature and humidity during operation and storage must be
within the limits specified in chapter 7 T
ECHNICAL DATA
.

The following influences always have to be avoided with the meter:
– Extreme dust, moisture and wetness
– Exposure to intensive light and heat
– Fumes that are corrosive or contain high concentrations of solvents.

For measuring, the meter must be placed on a flat surface.

Spilled liquid or other material should be removed immediately (see sec-
tion 5.3 C
LEANING
).

If a cell has broken in the cell shaft, the cell shaft should be cleaned imme-
diately (see section 6.1 A
CTIONS IN THE CASE OF A BROKEN CELL
).

The cell shaft should always be closed when the photometer is not used.

For the instrument to be transported the cell shaft has to be empty.

For mobile used we recommend using the suitable transport case
FC spectral 6000 .
3.2 Initial commissioning
Perform the following activities:

Insert the buffer batteries (see section 3.2.1)

Connect the power supply (see section 3.2.2)

Switch on the photometer (see section 3.2.3)

Set the language (see section 3.2.3)

Set the date and time (see section 3.2.4)

Carry out a zero adjustment (see section 4.3)
Packing This photometer is sent out in a protective transport packing.
CAUTION
Keep the original packing including the inner packing to protect the in-
strument against hard shocks if it has to be transported.