wtw Multi 350i, Руководство по эксплуатации

Страница: 78 / 108

Operation Multi 350i
76
4.9 Transmitting data (RS 232 interface)
4.9.1 Options for data transmission
Via the RS 232 interface, you can transmit data to a PC or an external
printer. The following table shows which data are transmitted to the in-
terface in which way:
Note
The following rule applies: With the exception of the menus, shortly
pressing the
<PRT> key generally outputs the display contents to the
Data Control Operation / description
Current
measured values
of all connected
sensors Manual
!
By pressing <PRT> short-
ly.
!
Simultaneously with every
manual data storage pro-
cess (see section 4.8.1).
Automatic, at
intervals
!
By pressing <PRT> for a
long time. Then you can
set the transmission inter-
val.
!
Simultaneously with every
automatic data storage
process (see
section 4.8.2).
Stored measured
values Manual
!
Displayed dataset with
<PRT> after calling up
from the data storage.
!
All datasets according to
the filter criteria via the
Output to RS232 function.
For details, see section 4.8.3.
Calibration records Manual
!
Calibration record of a sen-
sor with
<PRT> (after call-
ing up from the data
storage or at the end of a
calibration).
!
All calibration records after
calling up from the data
storage via the
Output to
RS232 function.
For details, see section 4.8.5
Automatic
!
For the respective sensor
at the end of a calibration.