wtw Multi 350i, Руководство по эксплуатации

Страница: 69 / 108

Multi 350i Operation
67
4.8.1 Manual data storage
Proceed as follows to transmit to the data data storage and simulta-
neously output to the interface a measurement dataset:
If the data storage is full The following window appears if all 504 storage locations are occupied:
You have the following options:
!
To erase the entire data storage, confirm Yes .
!
To cancel the data storage process and switch to the measured val-
ue display, confirm
No . Then you can, e.g. transmit the stored data
to a PC (see section 4.8.3) and subsequently erase the data storage
(see section 4.8.4).
1 Press the <STO> key shortly.
The menu for manual data storage appears.
2 If necessary, change and confirm the ID number (1 ... 999) with
<
▲
> <
▼
> and <MENU/ENTER> .
The dataset is stored. The instrument switches to the mea-
sured value display.
- 30.10.2003 11:24:16
- pH 7.000 24.8 °C AR
- Oxi 7.27 mg/l 25.0 °C AR
- TDS 689 mg/l 25.0 °C AR
Store with ID no.: 1
Continue
<STO> 1 of 504
Data storage full. Erase?
Yes
No
Warning