wtw inoLab Multi 9310 IDS, Руководство по эксплуатации

Страница: 22 / 114

Operation inoLab
®
Multi 9310 IDS
22
ba75937e10 08/2021
4.5.2 Measured value display
In the measured value display, you can
 open the menu for calibration and measurement settings with
<ENTER>
(short keystroke)
 open the system menu with the sensor-independent settings by pressing
<ENTER>
Storage & config
for a
<ENTER__>
long keystroke, approx.
2 s).
 change the display in the selected measuring screen (e. g. pH
><−
mV) by
pressing
<M>
.
4.5.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further subelements.
The selection is done with the
<

><

>
keys. The current selection is dis-
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
<ENTER>
. Example:

Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with
<ENTER>
. Subsequently,
the setting can be changed with
<

><

>
and
<ENTER>
. Example:
Storing in
memory The meter stores measuring data automatically or manually
Transmit-
ting data The meter transmits measuring data and calibration records
to a USB-B interface automatically or manually.
Setting The system menu or a sensor menu with submenus, set-
tings and functions is displayed
Operating
mode Explanation
General
Interface
Clock function
Service information
Reset
System
03.04.2013
08:00
Back