wtw inoLab Multi 9310 IDS, Руководство по эксплуатации, Страница: 77 / 114

inoLab
®
Multi 9310 IDS Settings
ba75937e10 08/2021
77
10.5 Turb measurement settings
10.5.1 Settings for turbidity sensors
The settings are made in the menu for the measured parameter, turbidity. To
open the settings, display the required measured parameter in the measured
value display and press the
<ENTER>
key. After completing the settings,
switch to the measured value display with
<M>
.
The possible settings are individually displayed for each sensor. Default set-
tings are printed in
bold .
Setting menu of the
VisoTurb
®
900-P
Temp. comp. (TC)
/
Linear coeff.
0.000 ...
2.000 ...
3.000 %/K
Coefficient of the linear tempera-
ture compensation.
This menu item is only available
when the linear temperature com-
pensation is set.
Temp. comp. (TC)
/
Reference temp.
20 °C
25 °C
Reference temperature
This setting is only available for the
measured parameters, conductivity
(
ϰ
) and resistivity (
ρ
).
Multiplier for TDS 0.40 ... 1.00
Multiplier for TDS value
Menu item Possible
setting Explanation
Menu item Possible
setting Explanation
Calibration
/
Calibration record
-
Displays the calibration record of the
last calibration.
Calibration
/
Calibration data
storage
/
Display
-
Displays the last calibration records
(max. 10)
Calibration
/
Calibration data
storage
/
Copy to
USB flash drive
-
Outputs the stored calibration data
to a connected USB memory device/
USB printer)
Calibration
/
Calibration data
storage
/
Output to
RS232/USB
-
Outputs the calibration data storage
to the interface