Original Operating Instructions
BATD0050-ES-1-400-1
Installation
O_BATD0050-ES-1-400-1_V2.6_GB
Page
38
of
72
3.5.1.7 Option Interface for SBB16-10
With the option interface for SBB16-10, a connected SBB16-10 can be switched on
and off remotely. The connection is done at the screw-type terminals in the lower left
area of the cabinet. The screw-type terminals are designed for conductor cross-
sections of
16 mm²
to
70 mm²
.
Required material:
•
Programmable logic controller (PLC) (not included in scope of delivery)
•
Voltage supply source (not included in scope of delivery)
The supply voltage source must be able to permanently supply 24 V
DC
/ 5 A and a
maximum current of 8 A for 0,1 ms.
Figure 18: Connection option Interface for SBB16-10
Pos.
Description
1
Screw-type terminal (-X13.1) DC (+)
2
Screw-type terminal (-X13.2) DC (-)
3
Supply voltage connection (-X10)
4
PLC connection (-X11)
Procedure:
1.
Connect
the DC cables as follows:
DC (+)
to the grey screw-type terminal (-X13.1),
tighten
the screw with
6-8 Nm
.
DC (-)
to the blue screw-type terminal (-X13.2),
tighten
the screw with
6-8 Nm
.
2.
Connect
supply voltage and PLC as shown in Figure 19.
Содержание BATD0050-ES-1-400-1
Страница 72: ......
