Original Operating Instructions
BATD0050-ES-1-400-1
Installation
O_BATD0050-ES-1-400-1_V2.6_GB
Page
32
of
72
3.5.1.1 Grounding
Procedure:
1.
Connect
the PE conductor on terminal (-X19) (Figure 12).
2.
Tighten
the screw with a torque of
6 Nm
.
NOTICE: The screw-type terminal is suitable for conductor cross-sections up to
50 mm
2
.
3.5.1.2 AC Connection
•
All grid parameters must be fulfilled (Section 11.2.1).
Figure 12: AC connection
Pos. Description
1
PE conductor connection
2
L1 phase connection
3
L2 phase connection
4
L3 phase connection
5
Neutral conductor connection
6
AC EMC filter
Procedure:
1.
Observe
the sequence (Figure 12).
2.
Connect
the cables to the corresponding terminals of the AC EMC filter.
3.
Tighten
the screws with a torque of
7-8 Nm
.
NOTICE: The screw-type terminal is suitable for conductor cross-sections up to
50 mm
2
.
Содержание BATD0050-ES-1-400-1
Страница 72: ......
