Menu “Input A/B/C/D” Input Channels Editing [access by pushing the “A/B/C/D” buttons]
From the “Default Screen”, it is possible to access the “Input A/B/C/D” menu by pushing the “A”, “B”, “C” or ”D”
button. Once the button is pressed the related blue “EDIT” LED will turn ON. The Sub-Menu pages can now be
scrolled through by rotating clockwise and counter-clockwise the “NAV/PM1” encoder.
For parameter editing it is necessary to press ENTER and an arrow will appear on the left of the screen “
->
”.
Then use the “PM2” and “PM3” encoders for selecting and setting the parameter values. On some parameters
that have three independent values, you will also need to use the NAV/PM1 encoder, eg filter parameter settings.
Note
: All parameter editing can be done using the “NAV/PM1”, “PM2”, and “PM3” encoders and the current shown
value of the selected option is AUTOMATICALLY loaded during the encoders' use and stored as the current value
once leaving the page is AUTOMATICALLY loaded during the encoders' use and stored as current value once left the
page.
Note1
: once the desired options have been selected using the 3 encoders, they are automatically saved as current
and stored in the WS-P48 system status once leaving the page.
Note2
: to exit this page, push the “ESC” button.
Audio Signal Input (A/B/C/D)
Noise Gate page
– from this screen it is possible to turn On or Off the Noise Gate on the input path.
The full setting of the Noise Gate parameter can be done by Remote Control ONLY, through the Pc Sw coming with
the Unit.
Source page
– The Dpa480 can assign to each input channel, independently, the input source.
Particularly 4 sources for the Input are available: Analog (coming on the Input XLR connectors), Digital (coming on
the S/Pdif RCA cpnnectors), White Noise or Pink Noise (generated internally).
The Input source can be selected pressing ENTER and using the “PM2” or “PM3” encoders.
The following is an example screen for the “Source” page that has set the Input as ANALOG:
Input-A Source
-> Source = Analog
Gain page
– from this screen it is possible to set the Input Channels Level from -18dB to +18dB, press ENTER an
arrow will appear on the left of the screen “->” then use the “PM2” or “PM3” buttons.
The value set on this screen will only affect the input level of the selected Channel A, B,C or D.
The following is an example screen for the “Gain” page that has set the Gain of Input Channel A to +0.0dB:
Input-A Gain
-> Gain = + 0.0dB
Delay page
– from this page it is possible to set the Input Channels Delay Time from 000.0000mS up to 400mS,
by steps of 1mS or 20.8uS.
To set the Delay time press ENTER, an arrow will appear on the left of the screen “
->
”. then use the “PM2”
encoder to set the Delay Time in steps of 1mS and the “PM3” for setting the “fine” Delay Time in steps of 20.8
microseconds.
The following is an example screen for the “Delay” page where the Delay Time of Input Channel A is set to
160.1872mS:
Input-A Delay
-> Delay = 160.1872mS
EQ Byp page
– from this sub-menu it is possible to Bypass or to make active the 5 Bands Equalizer placed on the
Input Signal Path.
Input-A EQ Byp
Eq Bypass = Off
When Bypassed the 5 Bands Equalizer, its current setting will not be lost.
EQ: [x] sub-menu
– from this sub-menu it is possible to set the Input Channels five available Multi-Type Filters.