−
Lock Unit:
this sub-menu allows the user to lock the device so no parameters can be edited or modified.
SECURITY UTILITY
-- Lock Unit --
When the Unit is in an unlocked condition, all parameters will be available for editing. When you select On, all
parameters will be locked and are not available for editing.
Lock Unit
Lock : On *
When you select lock from the menu, the unit will be locked and the lock menu automatically exited. The
screen will revert to the “Default” showing the current XOVER configuration and the preset selected and
beside the preset’s name a “keylock” icon indicating that the WS-P48 is locked.
−
User Password:
from the “User Password” sub-menu:
SECURITY UTILITY
-- User Password --
Press “ENTER” to access the “User Password” page:
User Password
[ ]
Using the PM2 or PM3 encoders to choose a character and the NAV/PM1” encoder to move between available
locations you can enter a 6 Character Password Name.
The current position of the cursor for the characters to be entered is shown by a “blinking underscore”.
During this editing phase, the display is as follows if we were using “DPA48X” as the password:
User Password
[DPA48X]
The WS-P48 will exit the “Unit Lock” sub-menu and jump to the “User Password” sub-menu page screen:
SECURITY UTILITY
-- Insert Password --
If the password entered in the “Confirm Password” page matches the one entered in the “Enter Password”
page, the following screen will appear.
Confirm Password
[DPA48X]
The Password is now configured and held in the device’s memory.
The user can now decide to “lock” the WS-P48 by Password, inhibiting the access to ALL processor
functions depending on the setting of the parameter “Password Enable/Disable, explained in the following
paragraph
Note
: originally the WS-P48 is initialized with a default Password which value is “000000”, value that can be
anytime reset with a “Factory Reset” (see “Factory Reset” procedure)
−
Enable Password:
from the “Enable Password” sub-menu: