WPG 98741, Руководство по эксплуатации

Страница: 12 / 51

1A 2A
MRTALP4-DC3: #35058 Rev 7.4/12-21 10
Connecting/Disconnecting Vacuum Hoses
Make sure quick
connectors seal
completely and all vacuum
hoses function correctly (see
“Vacuum Test” ).
To connect a vacuum hose, push the male and female ends of
the quick connector together until they lock (fig. 1A).
To disconnect a vacuum hose, move the release ring on the
female end until the quick connector separates (fig. 2A).
4A 3A
Make sure all hoses are
connected correctly: Green
hose to circuit 1 (fig. 3A) and
red hose to circuit 2 (fig. 4A).
5A
The 2 vacuum gauges are
labeled to indicate the
related circuits (fig. 5A).
Note: The gauge face colors
do not correspond with the
circuit colors.
ASSEMBLY