WPG 98741, Руководство по эксплуатации

Страница: 11 / 51

Rev 7.4/12-21 MRTALP4-DC3: #35058 9
T
O
A
SSEMBLE
/D
ISASSEMBLE THE
P
AD
F
RAME
Installing/Removing T-Arm Assemblies
Note: Always position T-arms as shown in “T
O
A
DJUST THE
P
AD
F
RAME
” .
1)
1A 2A
Insert a T-arm
assembly into the
pad frame (fig.
1A).
2) Use a cotterless
hitch pin to
secure the T-arm
(fig. 2A).
3) Install the second T-arm assembly likewise.
To remove the T-arm assemblies, reverse these steps. Store removed components in a clean,
dry location.
Installing/Removing Vacuum Pads
Notes: Use only 2 vacuum pads on each T-arm assembly. Pads must be arranged symmetrically,
to keep the lifter balanced.
1)
1B 2B
Position a sliding/
movable pad mount
on the T-arm
assembly (fig. 1B).
2) Use the cotterless
hitch pin to secure
the pad mount (fig.
2B).
3) Install the other pad mounts likewise.
4) Connect the vacuum pads to the 2 circuits of the dual vacuum system (marked “1” and
“2” in the illustrations under “T
O
A
DJUST THE
P
AD
F
RAME
” ).
To remove vacuum pads, reverse these steps. Store removed components in a clean, dry
location.
ASSEMBLY