Rev 7.4/12-21
MRTALP4-DC3: #35058
19
Powering up the Lifter
1A
Press the lifter's power button (
— fig. 1A). The
vacuum pump will run for a few seconds, as a
normal function of the Intelli-Grip
®
self-diagnostics.
The lifter automatically tests the 9-volt battery for
the notification buzzer each time the lifter is
powered up. When this battery runs down, the
LCD screen displays “Replace 9V battery?” and the
buzzer chirps once per minute. Replace the battery
as needed (see
).
1B
To use the optional Remote Control System, briefly hold the
power button (
— fig. 1B) on the radio transmitter to
activate it.
1
1C
Note: When you hold any button on the transmitter, the
transmission indicator light flashes green if the transmitter is
activated.
Sealing the Pads on the Load
Press the lifter’s “attach” button (
— fig. 1C).
Keep “attach” function
activated throughout lift.
1..... The radio transmitter turns off automatically after a period of inactivity.
OPERATION
Содержание 98741
Страница 2: ...MRTALP4 DC3 35058 Rev 7 4 12 21 2 ...
Страница 50: ...MRTALP4 DC3 35058 Rev 7 4 12 21 48 ...
Страница 51: ...Rev 7 4 12 21 MRTALP4 DC3 35058 49 ...
