Worx WX473, Инструкция по безопасности и эксплуатации

Страница: 4 / 17

Jigsaw WX473 WX473.1 WX474
4) POWER TOOL USE AND CARE
a)
Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will
do the job better and safer at the rate for
which it was designed.
b)
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c)
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools.
Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
d)
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool.
Power tools are
dangerous in the hands of untrained users.
e)
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use.
Many
accidents are caused by poorly maintained
power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g)
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) SERVICE
a)
Have your power tool serviced by
a qualified repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool is
maintained.
ADDITIONAL SAFETY
POINTS FOR YOUR JIGSAW
1.
Always wear a dust mask.
2.
Hold power tool by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord.
Cutting accessory contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
3.
Use clamps or another practical way
to secure and support the workpiece
to a stable platform.
Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
4.
Always wear safety glasses or eye
shields when using the jig saw.
Everyday eyeglasses have only
impact-resistant lenses; they are NOT
safety glasses.
Following this rule will
reduce the risk of serious personal injury.
5.
Always wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of
serious personal injury.
6.
Keep your hands away from cutting
area.
Do not reach under the material
being cut because the nearness of the
blade to your hand is hidden from your
sight.
7.
Do not use dull or damaged blades.
Bent blades can break easily, or cause
kickback.
8. Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
9. Fully unwind cable drum extensions to
avoid potential overheating.
10. When an extension cable is required you
must ensure it has the correct ampere
rating for your power tool and is in a safe
electrical condition.
11. Ensure your mains supply voltage is the
same as indicated on the rating plate.
12. Your tool is double insulated for additional
protection against a possible electrical
insulation failure within the tool.
13. Always check walls, floors and ceilings to
avoid hidden power cables and pipes.