Worx WX473, Инструкция по безопасности и эксплуатации

Страница: 11 / 17

Jigsaw WX473 WX473.1 WX474
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction
book carefully.
INTENDED USE:
The machine is intended for sawing wood, plastic,
metal and building materials while resting firmly
on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade
recommendations are to be observed.
1. ON/OFF SWITCH
Depress to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON
Depress on/off switch (2) then lock-on button (1)
(See Fig. A), release on/off switch first then lock-on
button second. Your switch is now locked on for
continuous use. To switch off your tool just depress and
release on/off switch.
3. VARIABLE SPEED CONTROL
Adjust the variable speed control to increase or
decrease the speed (See Fig. B) according to the
material, material thickness and blade specification to
be used (also possible during no load operation). See
Chart 1 for general guidance on speed selection.
Avoid prolonged use at very low speed as this may
damage your jigsaw’s motor.
Chart 1
Material Speed setting
Wood 5-6
Metal 3-4
Aluminum 3-5
PVC 3-4
Ceramic 3-5
4. HAND GRIP AREAS
Always ensure you maintain a firm grip whilst
operating your jigsaw.
5. DUST COVER
When operating your jigsaw the dust cover must be
closed to allow the dust extraction system to work
efficiently. The dust cover can be moved to improve
access for cleaning, blade fitting, etc (See Fig. C).
1 2
1
2
A
B
C
D
E
F
G
H