Worth Data TriCoder t53, Руководство пользователя

Страница: 146 / 246

13-6
Default Voice Messages
The TriCoder comes from the factory with some voice prompts and error
messages pre-recorded. You can change any of these messages but keep in
mind that the error conditions that the voice error messages are linked to are
fixed. For example, the “
Change Batteries ” message is located at message
#31. Whenever the TriCoder detects very low batteries, it will play message
#31, regardless of what is recorded there. You could record “Happy
Birthday” and the TriCoder would broadcast it any time it detected the low
battery condition. To avoid confusion, try to keep the error messages
somewhat related to the error condition they represent.
Here are the default messages and the message numbers they are recorded
under:
Message Recorded Message #
Prompts
ITEM #01
QUANTITY #02
Error messages
CHANGE BATTERIES #31
DATA FILE EXISTS #32
DATA TOO LONG #33
DATA TOO SHORT #34
DATA TYPE ERROR #35
DUPLICATE ACCESS #36
IDENTIFIER ERROR #37
ITEM NOT FOUND #38
OUT OF MEMORY #39
WRONG INPUT DEVICE #40
WARNING 2K LEFT #61
Cloning Voice Messages from TriCoder to
TriCoder
If you have several TriCoders, you can record all of your voice messages in
one TriCoder and simply “clone” them to your other TriCoders. Cloning
can also copy programs, tables, and the TriCoder setup. Cloning does have
certain conditions that need to be met before you start:
•
The TriCoders must be set to the same Computer Interface and
if set for Serial instead of Keyboard, all TriCoders must be set
to the same
baud rate , parity , stop bits and data bits . TriCoders
with USB Computer Interface cannot clone from one TriCoder
to another, but you can change the Computer Interface on both
units to serial or keyboard wedge and then clone, (remember to
set it back to the appropriate USB
Computer Interface ).