Worth Data TriCoder t53, Руководство пользователя

Страница: 147 / 246

13-7
•
Upload any data in the TriCoders before you start. The
TriCoder will not allow you to receive a program if there is a
data file present.
•
Plug in the power supply. This eliminates the possibility of
your batteries running out during the cloning process.
•
You need 2 cables to clone voice messages, the Data Cloning
Cable #F38 and the Voice Cloning Cable #T15 . The Data
Cloning Cable plugs into the “Computer” port on each TriCoder.
One jack on the Voice Cloning Cable has two black rings on it –
this end must plug in to the RECEIVING TriCoder.
If you want to clone voice messages only , follow these steps:
1. Plug in the Data Cloning Cable AND the Voice Cloning Cable.
2. On the TriCoder you are cloning to (the one without your
custom voice prompts), answer NO to the MODE MENU
prompts until you see:
PROGRAM RECEIVE
KEY [YES/NO]?_
3. Answer YES by pressing the ENTER/YES key. The TriCoder
will display a message saying:
RECEIVE PROGRAM KEY
------------------------------------
Programs [1-3]?--->1–3
Clone TriCoder?------>0
4. To clone only the voice messages, press the 9 key. The
receiving TriCoder MUST be started first. The TriCoder will
display the following message:
RECEIVING PROGRAM
PLEASE WAIT
5. On the master TriCoder (the one you have recorded your
prompts in), answer NO to the prompts on the MODE MENU
until you see:
PROGRAM TRANSMIT
KEY [YES/NO]?_
Answer YES by pressing the ENTER/YES key. The TriCoder will
display a message saying:
PROGRAM TRANSMIT KEY
-------------------------------------
Programs [1-3]?-- >1 – 3
Clone Tricoder?-------->0