WORMS ACCESS 3400, Инструкция по эксплуатации

Страница: 9 / 36

EN
FR
ES
IT
RO
9
4. PRE-OPERATION CHECK
4.1. CHECK ENGINE OIL
(Fig.
1
)
Before checking or refilling oil, be sure generator is located on stable and level surface with engine
stopped.
•
Remove oil filler cap (a) and check the engine oil level.
•
If oil level is below the lower level line (c), refill with suitable oil (see table) to upper level line (b).
Do not screw in the oil filler cap when checking oil level.
Oil Capacity UPER LEVEL
ACCESS 3400 0,6 Liters
ACCESS 5000 1.1 Liters
ACCESS 8000 1.1 Liters
•
Change oil if contaminated (See ‘‘How-To’’ Maintenance).
RECOMMENDED ENGINE OIL (Fig.
2
):
Use class SE (API classification) oil or a higher grade oil according to the table below. SAE 10W-30
or 10W-40 is recommended for general, all temperature use. If single viscosity oil is used, select the
appropriate viscosity for the average temperature in your area.
4.2. CHECK ENGINE FUEL
Fig.
3
Do not remove the fuel tank cap while the engine is running. Do not refuel while
smoking or near naked flame or other such potential fire hazards. Otherwise fire accident
may occur.
Check fuel level at fuel level gauge (standard with large fuel tanks). Fig.
3
1 . If fuel level is low, refill with
unleaded automotive gasoline.
Be sure to use the fuel filter screen on the fuel filter neck. Fig.
3
2 .
Fuel tank capacity : See table page 8.