First use
25
GB
After SAleS Support
IRE
0044 151 649 1500
0044 1890 946 244
GB
IRE
Mounting the waste bag
The waste bag is hooked onto the back left of the saw table and serves to collect
smaller cutting rests.
1. Screw a nut
29
onto each of
the four carriage bolts
23
.
2. From the inside, insert the four screws
through the holes at the back on the
left table width extension
2
and on
the left side of the table length exten-
sion
3
and screw one nut
28
on
each from the outside.
3. Use an AF 8 ring and open-ended
spanner to tighten the nuts.
4. Hook the waste bag
15
onto the car-
riage bolts from the inside.
You should now have two carriage bolts
22
left. Store them well; they are needed to
mount the stop rail
14
on the cross guide
19
.
You have now successfully completed initial assembly.
3
2
23
29
28
15
