7. SYSTEM ASSEMBLY
7.2 HDMI Micro Video Output
The Workswell GIS 320 system is equipped with a standard HDMI micro video output. It can be connected to any
wireless video link or a display with HDMI input that supports GIS 320 resolution.
The default GIS 320 resolution 1280x720 (also called HD or 720p). It is recommended to use a display with 16:9
aspect ratio.
Figure 7.3: Connex wireless video link and DJI Lightbridge (not included)
The system can be connected to a wireless video link or a display using supplied lightweight HDMI cable.
7.3 RC Receiver
For interfacing with standard RC receivers, GIS 320 is equipped with a S.BUS input. The S.BUS input, communicating
control of multiple servo inputs, allows user to control the system remotely during the flight.
The first two virtual channels on the S.BUS function as primary directional controls within the menus and allow
for complete control over the device. The additional channels allow binding of function shortcuts which provide
quick, customizable access to various functions; capture trigger, mode change and so forth.
It is recommended to use a joystick for navigation in system menu. If connected as recommended, then the
behavior of the joystick is as shown on the following image.
Digital Input
Function
1
Up/Down
2
OK/Cancel
3‐4
Optional (shorcuts)
More information about digital inputs can be found in section 8
Digital IO Ports
.
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 210427 EN, 27
th
Apr, 2021
All pictures are only for illustration.
Real values may vary.
13
