WORKMASTER TO-A02, Руководство пользователя

Страница: 6 / 28

2
PH: 866.476.9217
II. SAFETY
Safety must be considered a basic factor in machinery operation at all times. All rotating
products are potentially dangerous. Most accidents are the result of carelessness or
negligence.
It is the responsibility of the owner and operator to install, maintain, and operate the
parts or components manufactured and supplied by WORKMASTER , in such a manner
as to comply with the Williams-Steiger Occupational Safety Act and with all state and
local laws, ordinances, regulations, and the American National Standards Institute
Safety Code (ANSI).
To prevent injury to yourself or others, and/or damage to equipment, you should
adhere to the following basic safety instructions.
1. Read carefully the entire Manual prior to installing or operating equipment.
2. Always follow proper precautions and use proper tools and safety equipment.
3. Be sure to receive proper training.
4. Always use the equipment and all its components in applications for which
they are approved.
5. Be sure to assemble all components correctly.
6. Never use worn, defective or damaged components.
7. Practice good housekeeping at all times, and maintain good lighting around
all equipment.
8. Perform required Lock-out/Tag-out procedure on all energy sources to the
equipment, mounting structure, loading and discharge systems in accordance
with ANSI Standards before installation or maintenance.
Failure to observe the following warnings will result in
serious injury or death and in damage to equipment.