WORKMASTER TO-A02, Руководство пользователя

Страница: 15 / 28

11
PH: 866.476.9217
6. When closing a Trap, the Tool will continue to rotate until the Trap is closed.
7. Continue the process for opening or closing each Trap.
IMPORTANT
After extended use of the Opener, the air pressure
setting should be re-checked and may require a minor
adjustment. This is usually caused by variations in the
air supply providing airflow to the FRL Unit, or due to
weather conditions.
CAUTION
Add, if necessary, the appropriate Drive Fitting Adaptor
for the next Trap
as shown in Figure 1: Trailer Type
Drive Fittings, P6
. Ensure the Standard Drive Fitting is
properly secured to the Tool's square drive with the
locking pin and safety securing o-ring.