WORKERS BEST WB 1400 FMR, Руководство пользователя

Страница: 18 / 126

Set rotation speed
You can control the rotational speed progressively with the rotation speed controller (5).
5
6
Changing gears
Depending on the selected switch setting, you can work with a higher or lower number
of revs.
To avoid damaging the gears, the gear selection (6) should only be operated when the
device is at a standstill!
Care and maintenance
Pull the plug out of the mains socket before performing any work on the power
tool!
• Don‘t use solvents of any kind to clean the plastic parts. Various chemicals can corrode
and damage these parts.
• Only use a clean cloth to remove dirt, oil, grease, dust etc.
Carbon brushes
If too many sparks are generated, have the carbon brushes checked by a specialist.
Attention! The carbon brushes may only be replaced by a specialist.
Electric equipment with expired service life and environmental
protection
Should your electric equipment be so intensively used that it must
be replaced one day, or there is no other use for it, please think about
protection of the environment. Electric equipment does not belong to
usual domestic waste. It can be dealt with in an environmentally friendly
manner.
Important instructions
Special waste, do not throw Maximum surrounding
into regular household waste. temperature 40 °C.
Do not throw into water. Green point.
Danger to life.
Do not throw into fire
MAX. 40 °C
17
1223852_BDA_WB_1400_FMR.indd 17 1223852_BDA_WB_1400_FMR.indd 17 02.11.20 12:50 02.11.20 12:50