Worcester GB162-100, Инструкция по установке и обслуживанию

Страница: 80 / 96

DISPLAY INFORMATION
6 720 648 726 (2011/07) 80
e
[a/1/8|
e
[8/2/5|
e
Fault:
Conflicting addresses. Both RC25 and RC35
are registered as Master.
No Off Both RC35 and RC25
activate heating
circuit 1 and DHW.
Depending on the
heating programs set
and the required
room temperatures,
the heating system
can no longer work
correctly. DHW
mode does not work
well.
e
[a/2/1|
e
[8/0/6|
e
Fault:
RC25-HK1 temperature sensor. The
integrated temperature sensor of the remote
control (control unit) of heating circuit 1 is
defective.
No Off Since there is no
actual room
temperature
information, room
influence and
optimization of the
switch times do not
work. The EMS
works on the basis
of the values last set
on the remote
control.
e
[a/2/1|
e
[8/1/6|
e
Fault:
RC25-HK1 communication. RC25 addressed
incorrectly, wired incorrectly or defective.
No Off Since there is no
actual room
temperature
information, room
influence and
optimization of the
switch times do not
work.
e
[a/2/2|
e
[8/0/6|
e
Fault:
RC25-HK2 temperature sensor. The
integrated temperature sensor of the remote
control (control unit) of heating circuit 2 is
defective.
No Off Since there is no
actual room
temperature
information, room
influence and
optimization of the
switch times do not
work. The EMS
works on the basis
of the values last set
on the remote
control.
Display codes
Display code LED on
UBA 3 Other effects
z
Main
display
code
z
Sub
display
code
z
Key to display code
Reset
requi-
red?
Table 24 Display codes