19
Fitting/Operating the lights:
The rear light is already fitted, to operate the rear light, simply press the button on the top of the light as
shown below.
To change the batteries in this unit, simply reach under the bottom edge and then pull the lower edge of
the light rearwards.
If your light doesn’t work initially, it is likely that the insulating material fitted at the factory to stop the bat-
tery going flat is still in place. Simply access the battery compartment and remove the small plastic insula-
tor that sits between the battery and terminal of the light.
The front light is supplied but needs to be fitted. It attaches to the handlebars as shown, but first you will
need to fit the batteries. Unscrew the base of the light and remove the battery cartridge. The batteries
should be fitted so that the negative terminal meets the spring end of the cartridge. Once the batteries
have been fitted, simply slide the cartridge back in place and re-fit the end cap.
