22
Control Module—Advanced
The control module has many advanced features and modes, these include back-lit display (for night rid-
ing), indicator options for max speed, average speed and current speed, a digital clock and a battery
power indicator. It also features a walking mode which is used when you want to wheel/push the bike, this
is basically a very low speed mode which is activated by pressing and holding the button marker with a
‘down-arrow’.
2.
3.
1.
5.
4.
1.
Battery Level Indicator
2.
Assistance Level (Pedal Assist)
3.
Odometer
4.
Digital Clock
Warning:
The control module comes pre-configured specifically for your bike. Incorrect settings could cause dam-
age to the bike components and also result in a bike that is not UK road legal. Any modifications made to
the controller configuration will void your warranty with immediate effect.
Turning Control Module On/Off
To turn on the control module press and hold the middle (Mode) button. Press and hold the same button
to turn off the module and disable all electric features of the bike.
Turning Backlight On/Off
To turn on the display backlight, press and hold the “Mode & Up” button, press and hold the same two
buttons to turn it off.
Varying Pedal Assist Level
To alter the level of assistance provided simply press the Up/Down arrows to cycle through the 5 levels of
assistance. Level 1 offers the least assistance while level 5 offers the greatest assistance.
Speed Display Mode
There are three different modes for the speed display, these are current speed, average speed and maxi-
mum speed. To switch between these modes, press and hold the “Up” button for approx. 1 second to cy-
cle through the modes.
Walking Mode
The bike also supports a walking mode which is basically a very slow mode allowing you to walk next to
the bike at approx. 6Km/h. This is activated by pressing and holding the “Down” button. As soon as the
button is released, the bike will stop.
