Leg
Grid
Pole
Bolt
Lock Nut
Step 3
Step 3
Step 1
Step 2
Step 2
Step 2
Step 4
Step 2
Plastic Shipping Caps
Fig. 2
GR112 18 Bike Double Sided
Parts List
Check parts list to ensure that you have received all the parts.
Step 3. Align bottom holes of Grid with middle hole of Legs. Insert Bolt upward
and fasten loosely with Lock Nut. Repeat by attaching other Leg to Grid.
Step 1
Step 2. Insert Bolt through hole at the top of the Leg and end of Grid. NOTE: Grid
must be positioned such that the holes align with Leg holes. See Figure 2.
Fasten loosely with Lock Nut. Repeat by attaching other Leg to Grid.
Step 1. Insert Bolt upward through last hole in Leg and Pole. Fasten loosely with
Lock Nut. Repeat by attaching other Leg to Pole.
Step 4. Insert Bolt upward through remaining hole in Leg and other Pole. Fasten
loosely with Lock Nut. Repeat by attaching other Leg to Pole.
Step 5. Complete assembly by tightening all fasteners.
Fig. 1
GRIDRAC GR110-112
ASSEMBLY INSTRUCTIONS
GR110 8 Bike Double Sided
MADE IN U.S.A.
PRINTED IN U.S.A.
BLUE, 7-24-13, SMC
Part
Quantity
Legs
2
Grid
1
Poles
2
3/8"-16x3 1/2" Hex Bolt
8
3/8"-16 Lock Nuts
8
CONFIDENTIAL DRAWING AND INFORMATION IS NOT TO BE COPIED OR DISCLOSED
TO OTHERS WITHOUT THE CONSENT OF GRABER MANUFACTURING, INC.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
©2013 GRABER MANUFACTURING, INC.
ALL PROPRIETARY RIGHTS RESERVED.
MADRAX DIVISION
GRABER MANUFACTURING, INC.
1080 UNIEK DRIVE
WAUNAKEE, WI 53597
P(800) 448-7931, P(608) 849-1080, F(608) 849-1081
WWW.MADRAX.COM, E-MAIL: [email protected]
