Woodward ProTech-GII, Руководство по эксплуатации продукта

Страница: 95 / 195

Manual 35086 ProTech-GII with Math Functions
Woodward 93
An asterisk (*) symbol in the Test column indicates that the alarm event occurred while the module was
in a test mode.
Peak Speed/Acceleration Log Page
Figure 4-31. Peak Speed/Acceleration Log Screen Example
This page displays a log of the peak sensed and recorded overspeed or over-acceleration levels sensed
since the log was last reset and the associated time and date information.
Reset Logs Page
Figure 4-32. Reset Logs Screen Example
This page allows clearing of all logs (Trip, Alarm, and Overspeed / Over-acceleration logs), or just the
Peak Speed/Acceleration Log.
Reset Log Procedure
1. Use the “Up Arrow” and “Down Arrow” keys to select the “All Logs” or “Peak Speed/Acceleration”
reset function then press the ENTER key.
2. At the Prompt to “Reset Logs?” or “Reset Peak Speed/Acceleration?”, press the “Reset” soft key to
reset the respective logs or the “Cancel” soft key to exit this screen without clearing the log(s).
3. If the Reset soft key was pressed, the user will be prompted to enter a password. To reset all logs,
the Test Level Password or the Config Level Password must be entered. To reset Peak
Speed/Acceleration, the Config Level Password must be entered.
4. After the correct password is entered, press the Enter soft key to reset the log(s).
Released